This will be a 5s, 4" Atom.

I decided to build another 4", since I had a lot of the parts already.

This build will have a canopy designed for the GoPro Session 5. Hopefully with the 5s, it will feel awesome.

I decided to go with the HGLRC F440 stack mainly due to the weight. I wanted the lightest setup possible to make way for the GoPro. The stack also takes 5s, so it's perfect. 40amps are way more than I'll ever use, so I think it'll be good.

For motors I'm using the RX1407's 2800kv, meant to be used on 5s as well.

Hardest part of the build was soldering up the motors to the ESC. I think it came out pretty clean. I decided to rotate the FC and the ESC 90 degrees to the right because of the power leads on the FC. They usually come off to the right, but it would run into the canopy. I also had to reset the values of the motor resources in order to get the right orientation.

Weights:

• AUW w/ Atomv3 Canopy (No HDCam) (700mah 4s) - 235g
• AUW w/ Atomv3 Canopy (No HDCam) (850mah 4s) - 255g

• AUW w/ Atomv3 Canopy (No HDCam) (850mah 5s) - 275g

• AUW w/ GoPro Canopy (700mah 4s) - 320g
• AUW w/ GoPro Canopy (700mah 5s) - 340g
• AUW w/ GoPro Canopy (850mah 4s) - 340g
• AUW w/ GoPro Canopy (850mah 5s) - 360g