HYPERLOW VERT FREESTYLE

By richrd on Jan 30, 2018

5 518  10 

New Vert Freestyle..... bigger brother to the Vert Racer.... now carries GoPro and larger electronics.

http://hyperlowframes.com/Vert-Freestyle_p_56.html

Photos

Part List

Frame

Vert Freestyle
Hyperlowframes.com
$75.00

Flight Controller

RaceFlight Revolt F4 Flight Controller - V2 with bobbins! (52 builds)
Readymaderc.com
$30.99

ESCs

Spedix IS30 4-in-1, 2-4S LiPo DShot_600 BLHeli_S 30A ESC (61 builds)
Pirofliprc.com
$49.99

ESCs

Spedix IS30 4-in-1, 2-4S LiPo DShot_600 BLHeli_S 30A ESC (61 builds)
Pirofliprc.com
$49.99

Motors

4 x PyroDrone HyperLite 2307-2522 Team Edition (12 builds)
Pirofliprc.com
$95.96

FPV Camera

RunCam Micro Swift 2 Orange (157 builds)
Pirofliprc.com
$34.99

FPV Transmitter

TBS UNIFY PRO 5G8 HV(SMA) (195 builds)
Pirofliprc.com
$49.95

Antenna

Menace RC - Raptor Antenna - RHCP (10 builds)
Readymaderc.com
$9.99

Receiver

TBS CROSSFIRE micro receiver V2 (69 builds)
Team-blacksheep.com
$44.95
Show stores (4)

Discussion

Sign in to comment.
Currently   21 days ago  
1

The Hyperlow frames look really cool, does it work well in flight? Also if you wanted the stretch to be horizontal could you just switch where the arm and standoff is?

Show 1 more comment
Currently   19 days ago 
1

More like an alien I think? I don't know that much about frames so maybe what I'm describing is a "true X". Is there a true X hyperlow vert frame?

richrd   18 days ago 

Gotcha. The alien goes the other way and is a squashed X, with smaller distance between the front and rear motors and greater distance between left and right. The top mount (and invertable to midmount) frame the HYPERLOW CG is a true X. That has no stretch to keep props out of view of GoPro footage. With the Vert, as its a midmount only, the GoPro sits much lower so props are going to be in footage regardless, so there was no reason not to make it stretched. I can do custom cuts if you ever want to try a true x vert, but if you want a true X midmount then the HYPERLOW CG already exist: http://hyperlowframes.com/HYPERLOW-CG_p_57.html

Currently   18 days ago 
1

Cool! I might look into getting a custom cut squashed X vert frame when my current frame dies. Keep up the epic frames!

Guides & Reviews

64 7,163  73
Jan 20, 2018

This is the 3rd revision in the "Wizard Killer" series of builds based on the Martian II frame. The original Wizard Killer was my response to the successful Eachine Wizard RTF quad. The Mark III supersedes the more budget oriented Wizard Killer Mark II and is the most featured packed, simple to build and powerful of the three. The base weight with props is about 326g and fully loaded with a battery..

Read more
7 2,128  3
Jan 10, 2018

At last, the Topsky F7X V2 is available. This is the updated V2 release which came 3 months after the failed V1 model from October, 2017. V1 had several issues and most reviewers declared it an utter failure. Did Topsky fix the issues and are these worth buying? Let's find out. On paper this sounded like a wonderful new goggle. Unfortunately we were let down. The displays exhibited ghosting, the..

Read more
Are you sure you want to unfollow this person?
Are you sure you want to delete this?
Click "Unsubscribe" to stop receiving notices pertaining to this post.
Click "Subscribe" to resume notices pertaining to this post.