Started off as a budget build and has slowly morphed into being a bit more than that. I wanted an inexpensive frame and high quality components that didn't break the budget. With many frames having a lowrider design, I wanted to integrate that into my build as well by using lower standoffs.
Ended up at 363g and it passed the hover test! Pretty happy fir my first 5" build.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how are the 2205 motors holding up with the heavy wieght and how did you get them so cheap?
They seem to be doing pretty well so far. I only got to properly do a full maiden today after working out some VTX issues. I was able to get them for $10/ea from RaceDayQuads.com Not sure if it was a sale or what.