This is the 2nd micro with HD that I have built. The last one was 3" with a Runcam Split 2. This time I'm using the Runcam Split mini on a 2.5" platform. I originally built this with a HGLRC Zeus board and Sunny Sky 1106 6500 kv motors, but on the 3rd day out the prop shaft fell right out of the bottom of the motor mid flight. So I had these parts for another project and decided to use them on this project. Originally I was going to run this on 3s but according to Ciotti FPV ( check him out on youtube if you want to see what a 4s CB can do) the RCX motors really come to life on 4s which is why I switched from the Zeus to the F428 the Zeus is 3s max. Below is a video of the original build with the Sunny Sky motors I will update the build when I get some footage from the new setup.
Frame |
Maintenance Mode
(3 builds)
Rotoriousfpv.com
|
See Site |
Flight Controller |
6.5g 20x20mm HGLRC XJB F428 Micro F4 AIO OSD BEC Flight Controller & 28A Blhel_S BB2 2-4S 4 in 1 ESC
(49 builds)
Banggood.com
|
$46.99 |
Motors |
4 x RCX H1304 5000kv Brushless Motor
(8 builds)
Rotorvillage.ca
|
$67.96 |
Propellers |
Gemfan Flash 2540 Tri-Blade 2.5" Prop 8 Pack - Choose Your Color
(171 builds)
Racedayquads.com
|
$3.69 |
FPV Camera |
RunCam Split Mini FPV Camera / HD 1080P 60 FPS Recorder
(57 builds)
Getfpv.com
|
$79.99 |
FPV Transmitter |
Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Transmitter with FC Uart Suppor
(7 builds)
Amazon.com
|
$14.99 |
Receiver |
FrSky R-XSR Ultra Mini Redundancy Receiver
(937 builds)
Helidirect.com
|
$19.99 |
Batteries |
TATTU 650mAh 4S1P 75C 14.8V Lipo Battery Pack with XT30 plug
(45 builds)
Getfpv.com
|
See Site |
HD Camera |
GoPro HERO Session Waterproof Digital Action Camera
(42 builds)
Amazon.com
|
$392.99 |
Nice build!
Glad to see the RC Split Mini fits in the CB. I'm taking notes...
Help me to understand why the Zeus cannot run a 4S?
My build was planning on it. I can still switch to 3S, but already ordered the batteries.
The board is just not rated for the voltage. In the spec it says 3s max, and when I looked around I found people that had tried 4s and fried it. They make a CB 3" that is drilled 30x30 and 20x20 so you could run a full size AIO like the Lumineer Alpha that is a single board solution that can take 4s.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What is the heigth of the stack HGLRC F428 + Split mini ?