How much of the video frame do the ducts take up in X config?

same distance from bottom, half of each duct. the whole bottom fifth. i prefer the view of +. i'm going to reverse motor direction and props and try a bit more tuning before i just add a lot of rc expo and go back to + for the view. while this is faster, the inductrix handles a bit better. maybe they're on to something with reversed motor directions. i'll make that change tomorrow and get some dvr footage of the test. for now, i forgot to share this. it pitches back out of nowhere for some reason... although at the end of the video motor 4 esc wire came lose. could have been the issue all along. after repair, only flew 2 batteries over the weekend and it seems to dip a lot under aggressive turns. so i'm thinking more expo :-/

That's a pretty good view. I've seen some where the ESC wires show up in the video.

i desoldered/resoldered the wires to make them flat as possible, and used heatshrink to keep them together and blend into the frame. tested reversed motor directions today and it did not like it at all. could be that i reversed in raceflight before flashing back to betaflight 3.0.1. the furious 1935 props seem to be 2035s that were cut and quality control didn't look too good. changed out my props, reversed motors back to standard using blheli configurator for chrome (woohoo!! https://chrome.google.com/webstore/search/blheli?utm_source=chrome-ntp-icon) and indoor flight seems a lot better. maybe my issue was props all along?? not sure. i'll do a better test tomorrow.

ended up getting 1935 props. still waiting on 1105b motors. i'll update the parts and try to get that info for you once the build it complete.