Sky Diver 🎢
By sergetania on Jul 28, 2018
Tried to do as clean of a build as I could hoping the frame is stable enough to keep the worst of the jello out. I know where the hype is these days (planning that next) but I really liked the FlexRC Komori frame that I got stuck hopelessly high up in the tree above the house. So this one is dedicated to the lost Komori!
The weight without a battery is 127g.
Photos
Part List
Show stores (7)
Looks like weird butterlfy ... did you remove the vibrations with this setup?
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Looks nice !! I am building mine (actually finished it) but have huge noise in the FPV-feed, lines going zig zag when throttling up. Have tried all in the book to change that to no avail...........bummer. I have come to the preliminary diagnosos this must be from ESC/motor wires close to/under the Split. Not going to change that now........will fly it a while to see how it flies.........
Mine is actually noisy as well, not sure why. I built an El Camino with the motor wires under the split and it wasn't noisy. In this build, the wires are off to the sides and it's noisy. I don't mind some noise but this time it is a bit too much. I will start adding caps.
Interesting. I tried all kinds of caps, difference was absolutely minimal, not worth it. Joing GNDs from VTX and Split also did not help. Twisitng cables neither...........will try different VTX soon or switch all to Acrobrat-frame.
What ESC/motors do you have?
And what vtx?
...all here now https://rotorbuilds.com/build/13635