AirBlade Intrepid V2 - 3" Lite

By airbladeuav on Oct 15, 2018

24  1,559  0

This is the ultimate mid range micro flyer. With AirBlade Superman 1404 3850kV on 850mah 4S running biblade props, you're looking at 8 minutes cruising. The frame also allows for dual cam setup if you want to throw on the HD cam like Split Mini or Caddx Turtle, or even a GoPro Session. Check out the footage here

All of that and staying under 250g make it a great quad to take with you on hikes to capture that stunning HD footage.
I've played around with Gemfan 3025 and HQProp T3x3 and I think the HQProp are better. I get virtually no jello, and the props are way more durable.

Photos

Part List

Frame

AirBlade Intrepid V2 3K Carbon Fiber Frame Kit - 3 inch and 4 inch (17 builds)
Airbladeuav.com
$36.99

Flight Controller

HGLRC F420 F4M3 FC 20A BLHeli_S 2-4S 4in1 ESC (3 builds)
Airbladeuav.com
$62.99

Motors

4 x AirBlade Superman AB 1404 Brushless Motors (22 builds)
Airbladeuav.com
$51.96

Propellers

HQProp T3X3 Biblade PC Propeller (Set of 4) (3 builds)
Airbladeuav.com
$1.89

FPV Camera

CADDX Turtle 1080P 60fps HD FPV Camera (5 builds)
Airbladeuav.com
See Site

FPV Transmitter

AKK FX3 Ultimate uFL and MMCX Connector (15 builds)
Airbladeuav.com
$18.99

Antenna

TrueRC AXII-U.FL 5.8Ghz (21 builds)
Airbladeuav.com
See Site

Receiver

Team BlackSheep TBS Crossfire Nano Receiver (218 builds)
Airbladeuav.com
See Site

Batteries

AirBlade Premium 850mAh 4S 14.8V 75C XT30 by Bonka (13 builds)
Airbladeuav.com
$19.99

Video Receiver

Furious FPV True-D V3.7 Diversity Receiver System Firmware 3.7
Airbladeuav.com
$69.99

Radio Module

Team BlackSheep Crossfire Micro TX Module (46 builds)
Airbladeuav.com
$69.99

Soldering Iron

TS 100 SOLDERING IRON (B2) (40 builds)
Airbladeuav.com
$59.99

Accessories

ETHIX TEMPERED ND4 FILTER FOR GOPRO 7 & 6
Airbladeuav.com
$9.99

Misc Supplies

Ethix Quad-builder Cable Set
Airbladeuav.com
$15.99
Show stores (1)

Discussion

Sign in to comment

Guides & Reviews

43 5,823  70
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more