Pit's Torque (Reverse stack racer build)

By Pit on May 21, 2019

24  567  4

A second, more racing oriented build with a few differences VS the first here: https://rotorbuilds.com/build/17646

  • No 16awg wires. Original motor wires were used.
  • Back arms race leds at the bottom of the arm.
  • Some new TPU parts. An extra TPU cushions on under the motors and on the "nose" area.

All the TPU parts are available at: https://www.thingiverse.com/KrisMin/collections/pits-torque
The carbon parts of the frame are available in 5", 5/6"hybrid and 6" size.



Sign in to comment

fovea   May 23, 2019  

awesome topplate view. very beautifull, like a skeleton watch :-)

Jodie Froster   May 23, 2019  

These builds are really inspirational. I particularly like how brave you are with that V top plate, it's straight drippin'. It's like it's wearing a thong, cause' you can see the goods even with the frame still on ;)
Also: those motor wire fasteners, the 3D printed ones. These are awesome, and the ones you had on the last build were awesome as well. Hard to say which I like better, but initially i'm into the new ones more.
I think the smaller motor wires are a smart choice, but I miss the grey, it really popp'd (and i'm still not %100 sure I don't like the 3D printed fasteners you used on those more than these....).
I dig that you put the lights on the bottom of the back for more than practical purposes, I actually want them to be different colors (spectator enjoyment).
All around sexy build.

Pit   May 23, 2019 

I love your analogy.
I also like the new racing build more. Its more practical while still being good to look at.

zombetto   May 21, 2019  

Really good!

Guides & Reviews

35 4,047  38
May 31, 2019

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more