pt0x 2.0

By pt0x on Dec 11, 2019

11 955 7

Armattan Badger DJI Edition for my second build. Such a nice frame with TPU from Brain3d.

I used kinesio tape to cover the race wire and hold the motor wires close to the frame.

Photos

Part List

Frame	Badger DJI Edition - Armattan Quads Armattanquads.com	$109.00
Flight Controller	SucceX-D F7 V2.1 TwinG Flight Controller (HD Version) Iflight-rc.com	$49.99
ESCs	SucceX 60A Plus BLHeli_32 4-in-1 ESC (4 builds) Iflight-rc.com	$79.99
Motors	4 x Hypetrain Vort3x (Vortex) 2207 2650KV \| Hypetrain FPV (2 builds) Hypetrainfpv.com	See Site
Propellers	DAL T5040C Cyclone Tri-Blade Dalprops.com	$2.29
FPV Camera	Caddx DJI Digital HD FPV Camera (164 builds) Getfpv.com	See Site
FPV Transmitter	DJI Digital HD FPV Air Unit Module (121 builds) Getfpv.com	See Site
Antenna	DJI Digital FPV Air Unit Elbow MMCX Antenna 2 Pack (44 builds) Racedayquads.com	$15.00
Receiver	TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER (1484 builds) Team-blacksheep.com	$24.95
Batteries	Tattu R-Line Version 3.0 1550mAh 14.8V 120C 4S1P Lipo Battery Pack with XT60 Plug Gensace.de	See Site
Power Distribution	Rohs Capacitor 2200uf 25v Super Capacitor 13*21mm - Buy Capacitor 2200uf 25v,2200uf 25v Capacitor,2200uf 25v Super Capacitor Pro Alibaba.com	See Site
3D Printed	Armattan Marmotte & Badger Accessory Kit (15 builds) Brain3d.com	$30.00
HD Camera	GoPro HERO 8 Black Coolblue.nl	See Site
Backpack	Torvol Quad PITSTOP Backpack Pro (21 builds) Getfpv.com	$199.99

Show stores (11)

Like Copy Part List Follow pt0x

Discussion

lordango Nov 25, 2020

how did you setup your power leads in front? did you rotate the esc and remapped the motors? i have the same stack.

pt0x Nov 25, 2020

Yeah I did it like that, still do it on my newer builds only now with a 20x20 stack. https://rotorbuilds.com/build/23338

Geppetto Jan 10, 2020

Hi, i am trying to copy this build and upscale it to 6s. Although it is not clear where is the route of the crossfire antena cable and the dji fpv unit cabling. Is it possible to provide more photos or a description of the cable routes ? Are all of these cables routed underneath the fpv unit ?

pt0x Jan 15, 2020

Hi! Sorry for the late response. I made a pic today showing the DJI unit and crossfire wires. I used the pad that came with the frame to stick on the air unit. I did cut out a little segment to route the wires though. worked like a charm.

Geppetto Jan 15, 2020

Thank you very much !

sedwo Dec 29, 2019

I'm researching a similar build, except with the Marmotte DJI Edition.
What made you choose the SUCCEX-D F7 TWING FC vs NewBeeDrone Infinity30?
Also how did you mount your Crossfire Nano Rx?

pt0x Dec 31, 2019

I didn't really choose tbh. Did a build before with the Succex-D and im very happy with it, so I used it in this one :)
I mouted the crossfire between the stack and air unit. There is little room but it fits with a bit of double sided tape.

Guides & Reviews

109 22,060 39

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

67 17,609 64

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews