RC Crazed Lil' MoFo Jr

By tekyguy on Jan 26, 2017

2  195  4

This little guy is a 450mah 3S rocket! The build turned out 20g lighter than my V1 Atom that has 1104 motors on it. The Lil' MoFo frame is a minimalistic 3mm thick single plate CF frame with a 3D printed TPU canopy. This is a prototype canopy shown on these pictures. The new canopy has a curved front with a sloped back. This model is perfect for warehouse flying, yard flying, warehouse racing, basically anywhere you fly that is tight. The AUW is 139.7g with a nanotech 3S 450mah!! Without the battery the weight is 98.9g. These weights include everything you see in the photos including the 3d printed arm guards.

Photos

Part List

Frame

RC Crazed Lil' MoFo 3
Rccrazed.com
$29.95

Flight Controller

Furious FPV Piko BLX FC 20x20mm (4 builds)
Rccrazed.com
$38.95

ESCs

Sunrise Cicada 10A 4in1 DShot BB2 ESC (3 builds)
Rccrazed.com
$34.99

Motors

4 x DYS BE1104 6500kv Micro Brushless Motor (10 builds)
Rccrazed.com
$43.96

Propellers

2 x DYS Blue XT3045S Tri Blade 3
Rccrazed.com
$2.78

FPV Camera

600TVL 110 degree Wide Angle Super Mini FPV Camera with MIC
Rccrazed.com
$14.99

FPV Transmitter

Furious FPV INNOVA OSD-VTX board 20x20mm
Rccrazed.com
$39.95

Antenna

TBS Unify Pro HV 5.8GHz Linear Antenna (U.FL) (76 builds)
Rccrazed.com
$6.95

Receiver

LemonRx DSMX Compatible Satellite Receiver (4 builds)
Rccrazed.com
$13.10
Show stores (1)

Discussion

Sign in to comment

Whiffles   Jan 26, 2017  

Looks like R2D2 doing a pirouette :)

tekyguy   Jan 26, 2017 

Is that a good thing or a bad thing? LOL! I like the look, but some have said the round top doesn't look good. The production top is more of a wedge.

Whiffles   Jan 26, 2017 

Neither, just think it looks unique. Definitely has a robot look going for it.

tekyguy   Jan 26, 2017 

Unique is good :-) Thanks!

Guides & Reviews

39 4,180  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,919  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more