This Build is based on this Build: https://rotorbuilds.com/build/19466 but uses a caddx vista and a TBS crossfire nano.
The whole Mamba stacks sits in the middle of the frame and i mounted the caddx vista on the top plate with a gopro sticker. The TBS Crossfire Nano Rx sits in a shrink tubing right under the caddx vista. It holds in place due to the antenna, the soldered wires and the ducts on the side.
I used batteries with a XT30 plug, but if you already have XT60 batteries i don't recommend the XT60.
The whole build is under 500g with GoPro Hero 8 and Tattu 850mAh 4S battery!
Caution: The frame is fragile and can break easily if you crash it hard on concrete.
Wiring:
Photos
Part List
Show stores (9)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Belo projeto, obrigado