Hi to this awesome community! First post build here.
This buld is very similar to https://rotorbuilds.com/build/23252 thanks to Samw85! but using latest Sanchez Air frame thanks to David_C!! It is intended for analog set-up but I could not resist to give a try with Vista.
Canopy thanks to BludzFPV! It is a prototype I recommend to increase the thickness on the laterals as it is quite tight and during the asembly I broken accidentally one side...being in TPU with the solder I fuse it and restored :-)
Build is very simple as just fit the vista with the camera into the canopy, solder motors and vista conections and use 3 bolts M1.6 to fit both parts toguether
Just finished build...fly footage will follow
Frame |
Sanchez Air [Ultralight 3" Toothpick] by Dave_C_FPV
(7 builds)
Thingiverse.com
|
See Site |
Flight Controller |
GOKU GN 413 13A AIO V2.1 (MPU6000) 25.5X25.5
(4 builds)
Flywoo.net
|
$89.23 |
Motors |
4 x FLYWOO ROBO RB 1202.5 11500kv 1.5mm shaft FPV Motor
(4 builds)
Flywoo.net
|
$92.00 |
Propellers |
Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop 8 Pack (1.5mm) - Choose Your ColorGrey
(22 builds)
Racedayquads.com
|
$3.29 |
FPV Camera |
Caddx Vista HD Digital System 5.8GHz FPV Transmitter VTX FOV 150 Degree Camera 1080P Recording AIO Compatible DJI FPV Goggles Re
(212 builds)
Banggood.com
|
$163.99 |
Batteries |
Gaoneng GNB 7.4V 2S 450MAH 80C Lipo Battery XT30 Plug
(47 builds)
Banggood.com
|
$8.99 |
Radio |
DJI Digital FPV Remote Controller - Mode 2
(62 builds)
Racedayquads.com
|
$209.29 |
Goggles |
DJI Digital HD FPV Goggles
(148 builds)
Airbladeuav.com
|
$529.00 |
3D Printed |
Vistapick Canopy - Caddx Vista Toothpick Mount (Prototype) by BludzFPV
(4 builds)
Thingiverse.com
|
See Site |
Amazing! How does it fly with your combination of 1202.5 motors and 2s battery? Does it have enough power? The kv seems a bit low for 2s, no? Also, how is durability? I would be very afraid of crashing with that super thin frame, haha. Here is my WIP build for comparison: 1204s on 3s with a sturdy 3mm frame.
Good to hear yours flies well. I have no jello except at 4s with sharp turns. I used m1.6 bolts up to the upper part of the vista. Seems that canopy is not stiff enough. I will order 3016 to test them thanks!!. Thanks for the video and canopy link!! I was not aware of Bludz! he noted the same reinforced haha!. I get around 4.5 min on 2s 450 with light acro. If i push I go up to 3min. 1404 is perfect for racing looking the video!! I think the more equilibrate motor maybe could be 1204 or 1303 at 3s. Depends on the pilot...for me I prefer more relax flying and 1202.5 are let say lower limit...but versatile as can carry from 2s to 4s. Cheers!!
I noticed the oscillations and jello only happen if I use a big battery (750mah 3s) and press-fit my props (no screws). So I'll try screwing my props next time I go fly. 1404 motors are way too big and too heavy for this kind of light build in my opinion, except if you want to race. 1303s should be a great fit, but they are still almost 2g heavier than the 1202.5s! So you would add 8 grams to the build... I want to test the following combination next: 1202.5 5800kv, 550mah 2s/3s, and possibly a lighter frame (my current one weighs 12g...)
hey can you share your BF dump?
hey, here they are,
Roll 48, 45, 26
Pitch: 52, 50, 28
Yaw: 65, 45
TPA: 0.50, Breakpoint: 1310
Recommended rates:
Set all Feed forward to zero
Roll: 0.99, 0.64, 0
Pitch: 0.99, 0.64, 0
Yaw: 0.99, 0.64, 0
just the ones indicated in the tp3 frame of the fpvcyle webpage.
I feel really focus flying dose pids.
happy flying