1st build - Armattan Chameleon

By Bluff on Mar 24, 2017

5  1,716  6

1st build


Part List


Chameleon (163 builds)

Flight Controller

Flip 32 - F3 - Omnibus v3 ( w/ BARO OPTION) (32 builds)


4X Racerstar RS30A V2 30A Blheli_S ESC OPTO 2-4S Support Oneshot42 Multishot 16.5 Dshot600 for RC Drone (89 builds)


4X Racerstar Racing Edition 2205 BR2205 2300KV 2-4S Brushless Motor For QAV250 ZMR250 RC Drone FPV Racing (76 builds)


CA$9.99 10% 10 Pairs Kingkong / LDARC 5040 5x4x3 3-Blade Single Color CW CCW Propellers for Racing Drone RC Parts from Toys (79 builds)

FPV Camera

Foxeer HS1197 Monster V2 16:9 1200TVL FPV Camera Built-in OSD Audio - NTSC - Lens 2.5mm - Blue (78 builds)

FPV Transmitter

Eachine TX526 5.8G 40CH 25MW/200MW/600MW Switchable AV Wireless FPV Transmitter RP-SMA Female (120 builds)


Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair Blue Red w/Canopy For RC Drone (114 builds)


Turnigy iA6C PPM/SBUS 8CH 2.4G AFHDS 2A Telemetry Receiver


ZOP Power 11.1V 1400mAh 65C 3S Lipo Battery XT60 Plug

Power Distribution

Realacc/Matek PDB-XPW 5V 12V Dual BEC PDB Built-in 140A Current Sensor with XT60PW Socket (15 builds)


Turnigy Evolution Digital AFHDS 2A Radio Control System w/TGY-iA6C Receiver White Mode 2 (11 builds)
Show stores (5)


Sign in to comment

ivanivanivan777   May 23, 2017  

Any Advice on how you got the Monster to fit? i heard people had a hard time and shaving needed to be done because of its width. any tips or Advice?

Bluff   May 23, 2017 

I just mounted the camera into the aluminum cage before attaching the cage to the frame. Then you just need to kind of squeeze the cage to line up the holes and slide the screws in as you go. I did not shave the camera down. Hope that helps.

Bluff   Mar 24, 2017  

First attempt at building. Will update photos as I go.

Whiffles   Mar 24, 2017 

With such a nice frame you may want to upgrade the motors at some point. Some 2207's would offer a little more oomph to carry it around.

Bluff   Mar 24, 2017 

Thats the plan. Budget build pretty much, but i wanted a frame that would last. So i spent the cash on the Armattan and will replace components as i go/break them.

enrbgill   Jul 06, 2017 

a little more oomph, I see what you did there ;)

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more