This is a long endurance build using S500 frame and 3D printed arms. Flight controller is the Holybro Pixhawk 4 Mini which supports way-point missions. DJI MAVIC 2 Pro/ Zoom motors are used to achieve high efficiency.
3D printed parts : https://www.thingiverse.com/thing:4587567
Frame |
S500 Arms for Mavic 2 Motors by Macaca
Thingiverse.com
|
See Site |
Motors |
4 x DJIMavic 2 PRO/ZOOM 2 2-Ա
Item.taobao.com
|
See Site |
3D Printed |
S500 Arms for Mavic 2 Motors by Macaca
Thingiverse.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
did you scavenge the motor off of another mavic pro? or buy them seperately.
Bought them from Taobao. Seller claimed that they were original DJI motors scavenged from Mavic pro 2.