Some new bits for a change. 20mm and 12mm standoffs
50amp esc
20 x 20 hglrc fc
2207 2450 kv motors
caddx vista micro
some cheep 7inch frames
and other bits
UP DATE,
Of all the craft i have built i have never had random ticks .
Nothing i have done can fix it or even change its behavior
I think i know how to build a quad . even the most out there builds have never had this issue.
RANDOM TICKS IN THE Z AXIS.
Even when looking at the gyro traces in bf config i get sharp peaks in the z , and i know for a fact that my hand movementa are not that sharp.
and only in the z.
has anyone else had this issue with hglrc f7 .
So I am swaping it out for a diferent 20 x 20 fc
and if it isnt fixed i will get back to you.
Flight Controller |
HGLRC Zeus F7 20x20 Flight Controller for DJI
(7 builds)
Racedayquads.com
|
$24.99 |
Propellers |
2 Pairs Dalprop Fold Series F7 7 Inch Folding Propeller Smooth DIY Props Long Range Compatible POPO for FPV Racing RC Drone
(4 builds)
Banggood.com
|
$4.99 |
FPV Camera |
Caddx Vista HD Digital System 5.8GHz FPV Transmitter VTX FOV 150 Degree Camera 1080P Recording AIO Compatible DJI FPV Goggles Re
(208 builds)
Banggood.com
|
$163.99 |
Hi having issues with random ticks in the z axis.
Has anyone else had issues with hglrc f7 20x20
Really nice! I've been thinking about inverting my 5", I've got inverted 65 and 75mm tiny whoops. https://rotorbuilds.com/build/27320 I love how they fly! How does your drone fly? Feel any benefits vs a normal 7"? Would like to see a flight vid 😄.
One of my main flyers is a GEPRC MK4! We are quad bros!!!
I run a 5", so not EXACTLY the same, but close enough. I dig the staggered arms, remindes me of the standoff setup on the CMW banggod.
What did you cut the cam plates out of?
Those blingy motors man, lookin gud. Did you buy one of those LAL 5 bind n fly setups, and harvest those motors from it?
Your u-joint socket extension looks like a robot arm (or maybe some OTHER robot part...)to me, I live in the states and they are all round. No square corners running along the long axis like yours. How come the hinge pins stick out so far on it? Do you use them to help turn the socket? Is it just coming out of it's hole, and needs to be pressed back in?
Ahem, just saying: https://rotorbuilds.com/build/20335 Great minds, and all that. Should we get team jerseys printed up or something...? ;-)
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How do you plan on landing this?
gently
If you go to my yt you will see how i land it,
Cheers