I won this frame at a Tiny Whoop race, then about a week or so later it got ran over by several times, so here's the rebuild!
Frame |
Beastmode 4- or 5-inch props – Detroit Multirotor Company
Detroit-multirotor-company.myshopify.com
|
$69.99 |
Flight Controller |
KISS F3 32bit Flight Controller V1.03
(178 builds)
Hobbyking.com
|
$29.33 |
ESCs |
4 x Aikon SEFM 30amp ESC (HW Version 3) (DShot Optimized)
(5 builds)
Fpv303.com
|
$63.80 |
Motors |
4 x DYS 2206 Fire 2300kv
(14 builds)
Getfpv.com
|
$62.96 |
FPV Camera |
RunCam Swift 2 (2.5mm lens) - Orange
(412 builds)
Getfpv.com
|
$34.99 |
FPV Transmitter |
Angry Beez FX799T 200mw 40 CH Video Transmitter
(37 builds)
Fpvheadquarters.com
|
$34.99 |
Antenna |
TBS Triumph 5.8 GHz Antenna - SMA
(369 builds)
Fpvheadquarters.com
|
$39.95 |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Batteries |
Thunder Power RC TP1300-4SA80X
Thunderpowerrc.com
|
$34.99 |
Power Distribution |
Lumenier 4Power + Plus PDB (5v/10v Reg, 184A Curr.)
(12 builds)
Getfpv.com
|
$12.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how do you have your antenna/sma mounted back there?
The vtx (with sma pigtail) is mounted to the back of the 3d printed piece, then the antenna mounted to the top plate.
Check out the new photo I added