Strictly Racing Drones - SR5 Rebuild

By abella on Mar 04, 2017

4  241  2

Re-built my Strictly Racing Drones SR5 with mostly new parts to make it closer to my other rigs for this season. Used shorter standoffs - 30mm instead of 35 just to try and trim it down a little. If I had a different VTX I could probably go even lower. 350g as it stands.

Photos

Part List

Frame

SR5 Drone Racing Frame (7 builds)
Strictlyracingdrones.com
$32.00

Flight Controller

OMNIBUS AIO F4 Flight Control with OSD (2 builds)
Fpvheadquarters.com
$39.99

ESCs

4 x DYS XS20A ESC - BLHeli_S
Fpvheadquarters.com
$39.96

Motors

4 x EMax RS2306 2400KV Racespec Brushless Motor (11 builds)
Fpvheadquarters.com
$79.96

Propellers

HQProp 5x4x4R Skitzo CW Propeller - 4 Blade (2 Pack - Blue)
Getfpv.com
$2.29

FPV Camera

Foxeer HS1177 Camera 600TVL NTSC 26mm 2.8mm Lens Sony Super Had II CCD for FPV Racing Drone QAV250 (6 builds)
Amazon.com
$34.99

FPV Transmitter

RMRC Cricket V2 - 5.8GHz Video Transmitter W/ Race Band - 200mw (8 builds)
Readymaderc.com
$24.99

Antenna

TBS Triumph 5.8 GHz Antenna - SMA (497 builds)
Fpvheadquarters.com
$39.95

Receiver

FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM (477 builds)
Getfpv.com
$14.99

Batteries

Tattu R-Line 4S 1300 mAh 95C Lipo Battery (92 builds)
Fpvheadquarters.com
$27.19

Power Distribution

Matek PDB XT60 w/ 5V & 12V BEC (5 builds)
Fpvheadquarters.com
$9.99
Show stores (5)

Discussion

Sign in to comment

QuadX   Mar 04, 2017  

What are the new motors like?

abella   Mar 05, 2017 

Haven't flown it yet, it was 7 degrees this morning.

Guides & Reviews

17 1,477  18
6 days ago

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more