HyperLite EVO 4mm 4-in-1 ESC

By moteasa on Apr 17, 2017

8  661  7

One of my racers for this season. I like this frames features and having a little more room to work with.


Part List


HyperLite EVO HD 5" Racing Frame 4mm Arms (2 builds)

Flight Controller

SP Racing F4 Acro Flight Controller for Cleanflight & Betaflight (2 builds)


DYS F20A 4in1 20amp ESC with 5 and 12volt BEC (22 builds)


4 x RCX RS2206 (V2) 2400KV FPV Racing Motor (Japan EZO Bearing / N52SH Arc Magnet) (5 builds)


5" Double Blade Propellers 5038DCS Clear Orange

FPV Camera

Runcam Swift 2 Black (7 builds)

FPV Transmitter

10CM SMA Pigtail W/UFL Connector (15 builds)

FPV Transmitter

TBS UNIFY PRO 5G8 HV - RACE (SMA) (544 builds)


Lumenier AXII 5.8GHz Antenna (RHCP)


FrSky XSR (480 builds)
Show stores (2)


Sign in to comment

Aahi   Apr 23, 2017  

Hi Moteasa. Nice Build! I've actually ordered the same motor/esc combo but with a DYS omnibus F4 FC, which should stack nicely with the F20A. I'm starting to have second thoughts about the amp draw from these motors and wanted to see if you had been happy with the performance of your F20A? I'm gonna run 4s and 2 blade props in the beginning to test it out but would like to start using some heavier 3 blade props permanently and am worried that the F20A won't be able to handle the 30A+ spikes. what are your thoughts?


highway11   Apr 18, 2017  

How do you like those props with that motor?

Show 2 more comments
moteasa   Apr 18, 2017 

I agree on those two prop selections. This isn't my run, but it's the course I was running with these props. Very tight, so that much power would have gotten me in more trouble. Better off propped down a bit and the more durable bi props that day.

highway11   Apr 18, 2017 

wow, nice track. Looks pretty difficult too. Is that based on the MultiGP Regional finals track? It looks somewhat similar

moteasa   Apr 18, 2017 

Good eye. There's a few elements from the regional finals track and the rest is just a gauntlet of things. The guy that sets it up has a 3" lightweight so the course usually favors tight and twisty. Only a few of us run out there. For our bigger club races the courses are bigger and more open. More than a few people on this course would have a lot of mid-airs. Great practice though.

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,945  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more