3DPOWER x BabyHawk 3s-4s 100-BLAC-SX Stretch X

By wklee.fpv on May 15, 2017

8  1,093  7

This is a 3s-4s setup for EMAX Babyhawk drone transformation. It is ~72g (2g heavier than Babyhawk). Cant wait to test it!!

Photos

Discussion

Sign in to comment

Carstiee   Jan 02, 2018  

very nice and clean build. do you have any link to the 3D printed files (STL) for cam and flight controller?
Thanks Carsten

festusfpv   Nov 15, 2017  

looks nice I have almost the same setup except that my esc are different are you going to upgrade the motors to the emax rs 1106 6000 kv or 7500 kv

Lothy   May 19, 2017  

Hey wklee.fpv,

This looks swwet!
Which batteries do you plan to use on the little one? Have you maiden it?

wklee.fpv   May 21, 2017 

3s 550mah

moteasa   May 15, 2017  

Do you have a link to those prop guards?

wklee.fpv   May 21, 2017 

Guides & Reviews

28 2,370  33
26 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,926  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more