Custom frame: Camazotz by FPV Graveyard, bonkers motors: Mjolnir 2308 2600kv motors by Rotaro, high pitch props: Cyclone 5050 Tri-blades (for its first outing), and an awesome flight stack: Typhoon FC/PDB & stackable VTX setup by Motolabs! The frame needs to be tweaked a little but is awesome!
I also built this frame up once with some other components which are also pictured here. :)
Flight Controller |
MotoLab Typhoon F4 FC Flight Controller
(3 builds)
Heli-nation.com
|
$44.99 |
ESCs |
4 x Spedix ES30-HV 30A 3-6S LiPo BLHeLi_S - 1 x ESC
Heli-nation.com
|
$47.96 |
Motors |
4 x Mjölnir 2308-2600KV
(5 builds)
Rotaro.no
|
See Site |
Propellers |
DALProp T5050C Cyclone Prop
(3 builds)
Fpvheadquarters.com
|
$2.99 |
FPV Camera |
Foxeer Arrow V3 2.5mm Lens FPV Camera with Built-in OSD - Blue, Silver, Black, Orange
(131 builds)
Racedayquads.com
|
$29.99 |
FPV Transmitter |
MotoLab Typhoon Switchable 25/200/500 mW VTX
(3 builds)
Heli-nation.com
|
$44.99 |
Antenna |
Team BlackSheep TBS UNIFY PRO 5G8 Linear 5.8GHz Video TX/RX Antenna - Heli-Nation
(92 builds)
Heli-nation.com
|
$6.95 |
Receiver |
FrSky XM+ Receiver (Dual UFL Antennas) (SBUS)
(1149 builds)
Fpv303.com
|
$12.95 |
Batteries |
Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60
(112 builds)
Hobbyking.com
|
$20.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Those motors look pretty beastly, would you recommend them over f60? What is the weight like per motor?
They are SO beastly! Tbh, they blow pretty much any other motor out of the water but that performance likely comes at a price: amperage. My OSD isn't configured properly to show me current draw so I have no idea how much these guys were screwing me, but I did destroy four batteries. (See the second half of the video)
If you run more mellow pitched props you should be in a better place than I was :p