10S / 179.3MPH / Monster
Photos
Part List
Flight Controller |
Motolab Cyclone STM32F3 Flight Controller V1.2
(4 builds)
Defiancerc.com
|
$33.99 |
ESCs |
BeeRotor BS80A OneShot/MultiShot/DSHOT/BLHeli_S ESC 2-8S
Rctimer.com
|
$39.99 |
Motors |
4 x Tiger Motor F80 2200Kv FPV Series Motor
(11 builds)
Getfpv.com
|
$103.96 |
Propellers |
APC 5x4.5 FPV Bullnose Electric Set (4) | $4.96 |
FPV Camera |
Banggood
(130 builds)
Banggood.com
|
$15.45 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (RP-SMA)
(103 builds)
Team-blacksheep.com
|
$39.95 |
Antenna |
Lumenier AXII 5.8GHz Antenna (RHCP) (2pcs)
(199 builds)
Getfpv.com
|
$29.99 |
Receiver |
TBS Crossfire Micro RX V2
(288 builds)
Team-blacksheep.com
|
$34.95 |
Batteries |
2 x Tattu R-Line 6S 1300mAh 95C
(9 builds)
Progressiverc.com
|
$59.98 |
What are you doing for power distribution? Can't imagine that a standard PDB could handle that current. Also, some of the articles that I read said that prototypes burst into flames. What went up? Motor, ESC?
Congrats guys!
How did you get 10s out of two 6s?
Show 1 more comment
I see the F80 2200's on sale for $19. People say they're to heavy for a 5" build but I'm having a hard time buying a lower Kv motor which is also lighter for the same or more money. I will be running 6S and figured I can adjust throttle ratio in Betaflight. I then read these are really linear and not to much power on the bottom so Freestyle could have precision. So ... do you think I should get these or find some other motor?