Trying to build a fast 3" setup with a new awesome looking frame. It incorporates a hs1177 in the build so no more CMOS cams.
Frame |
Le Volcor by Adam Kobitz
(5 builds)
Hyphymultirotors.com
|
$34.99 |
Flight Controller |
FLIP32-F3-OMNIBUS AIO ASGARD (F3+ESC+OSD+CS)
(11 builds)
Readytoflyquads.com
|
$54.99 |
Motors |
4 x BrotherHobby Tornado T1 1407 3600KV Racing Edition Motor
(193 builds)
Droneeclipse.com
|
$63.96 |
Propellers |
Lumenier 3x4x3 V2 - Propeller (Set of 4 - Transparent Purple)
(11 builds)
Getfpv.com
|
$2.99 |
FPV Camera |
Foxeer HS1177 V2 - IR Block - Black
(5 builds)
Fpvheadquarters.com
|
$35.99 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Banggood.com
|
$12.22 |
Receiver |
FrSky XM+ PLUS (Mini SBUS Non-telemetry Full Range)
(1149 builds)
Droneeclipse.com
|
$12.98 |
Batteries |
Bonka Power 850MAH 4S 75C XT-60
(3 builds)
Pitchrollyaw.net
|
$21.99 |
Video Receiver |
Eachine VR008 Duo Antennas 4.3 Inch 5.8G 40CH Raceband FPV Goggles Auto Searching
Banggood.com
|
$42.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Didn't want to dye the winglets? Looks pretty good regardless, but those will turn green pretty quick ;). How do you like those props? I'm starting to experiment with props on mine.
How did you dye yours?
It's Rit powder dye. I just boiled some water, added the dye and let them stew in it for 30 minutes.
I finally flew it full out today. Damn this thing screams. I am going to put the lumineers back on. The ones pictured are the racekraft ones and seem to be missing power on low rpm.
I just tried the RotorX 3044Ts today and they were great! The vibrations were quite an improvement over the RK 3030 quad-blades. Here's some flight footage.