GEPRC MX3 Sparrow "Red Four"
By Dropkickjohnny on Aug 20, 2017
First go with a 20x20 stack. I originally wanted to go with a 30x30, but there just wasn't enough room for the 4-in-1 esc I had . Thanks for checking it out. Everything but battery is 133 grams.
Photos
Part List
Show stores (9)
Awesome build! I'm working on a sparrow build now, going slow to make sure everything is perfect. While I went to college for electronics and electricity and computer networking, my soldering skills are basic at best. I did build a lisam 210 about 6 months ago but the hglrc stack has some small solder spots. I'm practically using the same components as yours except the emax 1306's, I'm using the 3300kv version of the motors and the elf cam that comes with the combo stack. Love it. I should be doing a maiden in a week or so woohoo.
Hi there,
I'm glad that I found your build here, as I will build a slightly different Sparrow soon.
I will us the HGLRC XJB F428 and I like to know:
- Which AWG you used for the battery cable?
- Did you use the XT60 connector?
- Did you put the wire on the back or on the side?
I would love to see a pic of it too ^^
Thx mate and have great weekend + safe flight :P
DanO
which 4in1 30x30 ESC did you have that did not fit? I'm planning to build one of these with the runcam split and 30x30 4in1 and I'm hoping it will all fit
I had an emax magnum stack I was hoping to use. I also wanted to use a run cam split, but once the stack was not going to fit I abandoned that idea. Still looking for a good 3 inch frame for the split.
That being said, I'm really happy with how this build came together with the hglrc stack. Juat added a video from the dvr...
Great to finally see a build using this frame. Wow, that's light! I thought this frame might be a little heavy, but with those motors you did pretty well.
Do you know the weight of the aluminium top part (the canopy) with its screws and standoffs? Without the carbon base frame. Thanks!