This is the setup I used in the regional finals for region 6C. The build performed exceptionally and was capable of 6 laps, even though my piloting was not. Extremely happy with the fact that it recorded HD footage for every race of the day!
Frame |
MRM Reaper 195/220 FPV Racing Frame
(22 builds)
Multirotormania.com
|
$55.00 |
Flight Controller |
Flip32-F4-Helheim
(6 builds)
Readytoflyquads.com
|
$61.99 |
Motors |
4 x RaceDayQuads 2205 2450kv BadAss Racing Motor by BrotherHobby
(22 builds)
Racedayquads.com
|
$53.96 |
FPV Camera |
RunCam Micro Swift 2 600TVL CCD FPV Camera (2.1mm or 2.3mm) - Orange
(282 builds)
Racedayquads.com
|
$22.95 |
FPV Transmitter |
RDQ Mach 1 Video Transmitter 25-600mW VTX - U.FL or MMCX
(17 builds)
Racedayquads.com
|
$17.99 |
Receiver |
Flysky FS-X6B 6CH Receiver for FS-i10 FS-i8 FS-i6 FS-i6s FS-i6x FS-i4 FS-i4x Transmitter
(180 builds)
Amazon.com
|
$16.00 |
I don't think I've seen the runcam split used in tandem like this before.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
those quads look wicked! how durable/powerful are those motors?
These motors really surprised me with their power! Especially for their price point and stator size. So far I have broken 2. Both took the brunt of either a metal gate or concrete at full speed. I wouldn't expect any motor to come out of crashes like those unscathed. The only downside is that they are not hollow shaft, so they are prone to shearing if you screw on the nut too tight. Overall I would highly recommend them if you are looking for a budget motor. If not, you might consider the 2206 RDQ motors which have hollow shafts