Catalyst Machineworks Speed Addict 210-R
I built this multirotor for racing. I chose the 3 mm bottom plate to keep her light. She currently has the Emax RS2205 2300kv motors, but they will be replaced with the Silver Drone ZMX v3 2206 2300kv (blue top) motors after they arrive in the mail.
Frame |
Speed Addict 210-R FPV Racing Frame (5 inch)
Catalystmachineworks.com
|
$75.00 |
Flight Controller |
OMNIBUS F3 (LDO) Flight Controller with OSD
(59 builds)
Pitchrollyaw.net
|
$22.99 |
ESCs |
4 x Sunrise Cicada 30A BB2 (Partial DShot Support)
(12 builds)
Pitchrollyaw.net
|
$55.96 |
Motors |
4 x Returner V3 (ZMX) 2206 2300KV
(2 builds)
Pitchrollyaw.net
|
$87.96 |
Propellers |
Dalprop T5045 V2 Tri-Blades Bullnose Propeller
(2 builds)
Pitchrollyaw.net
|
$1.99 |
FPV Camera |
FOXEER XAT600M 600TVL Mini FPV Camera HS1177
(130 builds)
Pitchrollyaw.net
|
$39.99 |
FPV Transmitter |
Foxeer SWITCHER 25/200/600mW adjustable Power VTX with Race Band
Pitchrollyaw.net
|
$33.00 |
Antenna |
Foxeer 5.8G Antenna Circular Polarized Omni RHCP (Mini)
Pitchrollyaw.net
|
$9.99 |
Receiver |
Furious FPV Mini RX for Frsky
(3 builds)
Pitchrollyaw.net
|
$9.99 |
Batteries |
Revolectrix - Graphene 1500mAh 4S
Pitchrollyaw.net
|
$29.99 |
Power Distribution |
Matek HUBOSD Eco H-Type
Pitchrollyaw.net
|
$18.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I like the colors. Did you use a paint pen to do the edges?
Yes. Sharpie oil paint pen. Two coats. I really like how it turned out.
Yes, looks great! BTW, your motor and ESC quantities aren't updated. I'll see about fixing the missing prices.