I'm undecided on the frame here, but these components are great for a budget ultralight 4" quad.
Flight Controller |
Micro 20x20mm Betaflight Omnibus STM32F4 F4 Brushless Flight Controller Integrated with BEC OSD
(18 builds)
Banggood.com
|
$16.99 |
ESCs |
20x20mm Racerstar Star25 25A BLHELI_S 2-4S 4in1 ESC Dshot600 for RC Drone (20% Off Coupon: MSQW)
Banggood.com
|
$26.99 |
Motors |
4 x Brotherhobby Tornado T1 1407 3600KV 4S Racing Edition Brushless Motor for FPV Racer
(193 builds)
Banggood.com
|
$67.96 |
Propellers |
HQ 4x4.3x3 V1S (2CW+2CCW) PC **Choose Color**
(48 builds)
Pirofliprc.com
|
$2.99 |
FPV Camera |
RunCam Micro Swift 600TVL 2.1mm IR Blocked 1/3 CCD FPV Camera PAL/NTSC 5.6g
(192 builds)
Banggood.com
|
$29.99 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Banggood.com
|
$12.22 |
Receiver |
Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone
Banggood.com
|
$13.69 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Cool!
Just ordered that 4in1 ESC from Racerstar for my new 4" build. Really curious to see if it can hold up.
I went for this frame: https://armattanproductions.com/pages/kit_detail/1175
Probably not the lightest being 4mm, but I wanted some durability and I like its simplicity.
My build is here: https://rotorbuilds.com/build/6350
When will you make yours?