Ghost

By mavericm1 on Oct 09, 2017

4  488  5

Discussion

Sign in to comment

bsmith0   Oct 11, 2017  

How's the AIO FC working so far? Do you happen to know what the proper current calibration is?

Airmaxx23   Oct 09, 2017  

That frame looks a lot like the Floss 2 but with the standoffs and arm bolts reversed.

mavericm1   Oct 09, 2017 

its quite a bit different imho has two standoffs in the back. The standoff's i'm using aren't the provided standoffs as they are much much shorter and were causing fitment issues with the stack and the way i had built everything. You can only fit a micro camera on this frame as far as i can tell as well but it does have a lot of influence from the floss.

Airmaxx23   Oct 09, 2017 

Take a look at the Floss 2, not the original Floss. Either way your build looks nice, I'm just saying the frame looks a lot like the Floss 2. I had to print some spacers to put on top of my standoffs to lift the top plate a few millimeters. No offense intended.

https://rotorbuilds.com/build/7370

mavericm1   Oct 09, 2017 

None taken my mistake i didn't read thoroughly enough yeah they look very similar

Guides & Reviews

36 4,094  38
May 31, 2019

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more