The idea of this project was to use 3, 3.5 and 4inch props with 1407-3600kv brushless motors on a frame as short as possible.
We ended up with the "JellyFish", based on an awsome 145mm frame designed by my good friend Brax and a "Jelly" pod modelised by myself.
All details, pictures of the build and 3d models available on:
Photos
Part List
Frame |
JellyFish 145 (Carbon 4mm)
Armattanproductions.com
|
$35.00 |
Flight Controller |
KIT de 4 joints amortisseurs M3
(159 builds)
Fpv4drone.com
|
$0.30 |
ESCs |
4 x LittleBee Spring 20A - 2/4S - BLHeli_S - Dshot600
Drone-fpv-racer.com
|
$59.96 |
Motors |
4 x BrotherHobby Tornado 1407- 3600kv
(2 builds)
Drone-fpv-racer.com
|
$59.60 |
FPV Camera |
Caméra FPV Runcam Micro Swift 2
Drone-fpv-racer.com
|
$33.00 |
FPV Transmitter |
Micro Vtx Eachine (VTX03) Switchable
Space-drone.com
|
$16.90 |
Where can I find the canopy?
whats the weight on just the frame? or frame and pod
For the complete model that you see on the pictures, with 4mm frame, pod, all the electronics and 3.5" biblades props, weight is around 160gr without battery and around 240gr with a tattu 4s 650mah.
With the design of the pod, I try to keep the center of gravity as low as possible, the holes in the "head" are also for that purpose and not just an esthetic choice.
But how much is the frame and hardware alone? I love the design.
Glad you like it, but sorry dude, I don't know the weight of the frame alone.