Tiny "Dog" Shark

By MicroManiac on Dec 08, 2017

28 1,533 15

A big shout out to Mr. LAZD @FalconMultiRotors for opening up an "impatient" mans group buy. Thanks to you, I'm selling all my Whoops but keeping one for spec racing hahahaha.

Simply Amazing! I can't recommend this frame enough, best brushless indoor micro I've built and flown to date! Surprised to get more flight time than a Whoop on the same battery and, also handles larger 1S lipos with ease. Pulled out the old Hubsan lipos collecting dust and added a separate power connection, because LOSI hahaha. Logged over 8 hours of fun and motors still running strong. Haven't touched the 7mm "go to" Whoop for indoor shenanigans ever since! Even though the Shark bites don't hurt, ordered Aurora 100 prop guards to calm the Wifey hahaha

Loving every second of this indoor perfection... Everyone should have a Tiny Shark in their fleet!!!!!

Photos

Part List

Frame	Tinyshark (25 builds) Falconmultirotors.com	$25.00
Flight Controller	Fish01 1S ESC-FC Tower Frsky/16*16 mm/5.24g/SUBS/4-in-1 4A Blheli_S/Dshot 600/Built-in Receiver (3 builds) Boldclash.com	$24.99
Motors	Crazepony 4pcs BR1103 10000KV Brushless Motors for 50 80 100 Multirotor Quadcopter Drone Purple (6 builds) Amazon.com	$32.99
Propellers	RotorX RX1940SB - Smoke Black (6xCW + 6xCCW) (5 builds) Getfpv.com	$3.74
FPV Camera	Shinehalo LST-S2 5.8GB 800TVL 3.6g Mini FPV AIO Camera For RC Quadcopter Drone Model Amazon.com	$16.99
Misc Parts	Makerfire 4pcs Motor Guard Protector 1103 1104 1105 1106 Motor Protection Cap Motor Cover Case for FPV Racing Drone Quadcopter Amazon.com	$4.99
Misc Parts	4 PCS Eachine Propeller Guard For Aurora 100 Mini FPV Racing RC Drone 1102 1103 1104 1105 Brushless Motor (13 builds) Banggood.com	$2.49

Show stores (5)

Like Copy Part List Follow MicroManiac

Discussion

Ifly@sgfpv Jan 02, 2023

Awesome build!👍
what the weight without battery?
...my guess it should be very light as its flying great with 1s on 10000kv motor

MakerMan2020 Mar 12, 2018

How are these motors holding up?

MicroManiac Mar 12, 2018

Was hesitant to buy because of the Amazon reviews but, so far so good! The motor protection from the landing feet is most likely contributing to longevity.

MakerMan2020 Mar 13, 2018

Yeah I was looking at them and saw the same thing on amazon. Good to know they hold up

9Toes Dec 26, 2017

Love your build! How do you monitor your battery voltage?

MicroManiac Jan 06, 2018

Sorry for the late response, haven't been on in a while
Timer and OSD. Swapped cam for the G131 off Amazon.

solaireFPV Dec 11, 2017

Okay, I feel better after seeing this posted. My canopy aperature for the camera lens must be too small! I nearly tore it off when assembling it!

MicroManiac Dec 11, 2017

Tore off my original AIO. I believe LAZD is working on another canopy. Hit him up!

solaireFPV Dec 16, 2017

What hardware did you use to make the stack...having height issues here

MicroManiac Dec 17, 2017

From frame to bottom of ESC M2 nut which is 2mm tall. ESC to FC stock HW which is 5mm tall. On the front of the stack used a M2 but in conjunction with an anodized 5mm standoff which adds up to 7mm. In the very rear 15mm anodized standoff along with M2 nut totalling 17mm. Reference pic 7 and 8.

JaeWarren Dec 09, 2017

Great build. Can't wait to try this. I'd love to use the same canopy - was it 3-D printed or can I purchase it somewhere?

Thanks,
jae

MicroManiac Dec 09, 2017

Thanks for the kind words. Highly recommend this frame and motor combo. Canopies might be shipping with the next batch of frames but, I'd contact LAZD to be sure. If you have access to a 3D printer, here's a link to the print file: https://www.thingiverse.com/thing:2644550
Last I spoke with LAZD, he mentioned he was working on having better quality printed canopies available for sale on the site. Had a buddy print mine in PLA. Very hard but brittle.

At a minimum, the frame should come with the printed camera mount along with the appropriate M2 hardware unless, LAZD decides to do something else with the next batch which I doubt.

JaeWarren Dec 10, 2017

Awesome. Thanks 🙏 for the info and advice.

deks Dec 09, 2017

Love the colors!

Where did you get those motor bumpers/landing gear things?

MicroManiac Dec 09, 2017

Added to parts list. Thanks my good friend on the East Coast. Kuge-Aniya!!!!!!

Guides & Reviews

109 22,060 39

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

67 17,609 64

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews