Catalyst Machineworks Stigg 195
Frame |
Stigg 195 FPV Racing Quad (5 inch)
(4 builds)
Catalystmachineworks.com
|
$69.99 |
Flight Controller |
KOMBINI Flight Controller
Pitchrollyaw.net
|
$48.99 |
ESCs |
4 x Sunrise Cicada 30A BB2 (Partial DShot Support)
(12 builds)
Pitchrollyaw.net
|
$55.96 |
Motors |
4 x Returner V3 (ZMX) 2206 2300KV
(2 builds)
Pitchrollyaw.net
|
$87.96 |
Propellers |
Dalprop T5045 V2 Tri-Blades Bullnose Propeller
(2 builds)
Pitchrollyaw.net
|
$1.99 |
FPV Camera |
FOXEER XAT600M 600TVL Mini FPV Camera HS1177
(130 builds)
Pitchrollyaw.net
|
$39.99 |
FPV Transmitter |
Foxeer SWITCHER 25/200/600mW adjustable Power VTX with Race Band
Pitchrollyaw.net
|
$33.00 |
Antenna |
TBS Triumph 5.8 GHz Antenna - SMA
(369 builds)
Fpvheadquarters.com
|
$39.95 |
Receiver |
Furious FPV Mini RX for Frsky
(3 builds)
Pitchrollyaw.net
|
$9.99 |
Batteries |
Revolectrix - Graphene 1500mAh 4S
Pitchrollyaw.net
|
$29.99 |
This frame is the perfect amount of weird.
Actually, what about even smaller? I just ran across this bad boy: http://www.thingiverse.com/thing:1329897 I would buy the CF frame from Armattan. I want something I can fly in my office's garage with a little more room to breath than my 180. And the prop guards seem like they'd be a good idea for garage flying too.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Did you have any issues with the gyro on the dtf? Mine seems to be unflyable unless I soft mount it. I'm starting to suspect that both the red bottoms, AND dys motors I tried are causing it. The build is http://rotorbuilds.com/build/702
I had to soft mount my DTFc as well to get the shakes out.