She's built for speed and little else.
The frame is milled from 6061 aluminum and is the minimum required spacing for 5" props. A compact flight stack is achieved with an AIO + ESC board.
Highly rigid arms and an AXII antenna below the plane of the top plate makes her extremely resistant to crashes.
Flight Controller |
Lumenier ALPHA AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr)
(22 builds)
Getfpv.com
|
$69.99 |
Motors |
4 x EMAX 2306-2400KV RS Special Edition Motor
(87 builds)
Getfpv.com
|
$79.96 |
Propellers |
DAL T4045 V2 Tri-Blade
(30 builds)
Dalprops.com
|
$2.49 |
FPV Camera |
RunCam Eagle 2 Pro CM-1200 Lumenier Edition (White)
(21 builds)
Getfpv.com
|
$52.99 |
FPV Transmitter |
TBS Unify Pro 5G8 V2 (SMA)
(154 builds)
Getfpv.com
|
$34.99 |
Antenna |
Lumenier AXII Stubby 5.8GHz Antenna (RHCP)
(232 builds)
Getfpv.com
|
$14.99 |
Receiver |
FrSky X4R-SB - 3/16 Channel Receiver with SBUS and CPPM without pins
(128 builds)
Getfpv.com
|
$22.49 |
Misc Parts |
Unify Pro Mounting Board V2
(27 builds)
Whitenoisefpv.com
|
$4.95 |
Very unique design! How's the dry weight except battery? Don't you have any plan to commercialize the frame?
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice!!! it's very elegant!!
What is the final weight? I assume aluminum can be bent in hard crush...
Check my build (I just ordered custom carbon cut from armattan): https://rotorbuilds.com/build/8126
I can share frame design - it's also a compact tower style.