TBS Raggio Lungo 7"

By lazd on Feb 23, 2018

34  1,852  17

A full TBS Raggio Lungo build with 7" props.

I was impressed at how easily the build came together, with the GPS, Crossfire, and camera plugging into the TBS Powercube Elite stack with the provided cables and no soldering! The only things I soldered on the build were the pigtail, ESC power/signal/ground, and the massive capacitor bank I added for 5S/6S compatibility.

Once installed, the FPVision setup screen came up, and it took just a moment to get it all set up, then everything just worked out of the box. I did have to configure a channel to send Link Quality, then select PPM as the source under the OSD > RSSI configuration menu, but then I was basically done. I couldn’t believe how easy it was to get going thanks to TBS’ tight integration with all its components. The only thing missing is SmartAudio control of the VTX with LUA scripts, otherwise, it’s perfectly integrated.

Want to win a Raggio with this exact gear?

Hit https://www.facebook.com/velocidroneracingleague/ to see contest rules, ends April 26th!

Photos

Part List

Frame

Raggio (9 builds)
Falconmultirotors.com
$99.00

Flight Controller

TBS POWERCUBE FC - Colibri RACE 2.0 (6 builds)
Team-blacksheep.com
$29.95

ESCs

4 x TBS BulletProof 25A DSHOT600 ESC BLOWOUT (31 builds)
Team-blacksheep.com
$23.80

Motors

4 x TBS ENDURANCE Motors (3 builds)
Team-blacksheep.com
$99.80

Propellers

Gemfan Flash Durable 2 Blade 7042 - Black (5 builds)
Readymaderc.com
$3.85

FPV Camera

RunCam Micro Swift (193 builds)
Pitchrollyaw.net
$29.99

FPV Transmitter

TBS Powercube FPVision (13 builds)
Team-blacksheep.com
$99.95

Antenna

TBS Triumph 5.8 GHz Antenna - SMA (512 builds)
Fpvheadquarters.com
$39.95

Receiver

TBS Crossfire Micro Receiver V2 (265 builds)
Team-blacksheep.com
$34.95

Power Distribution

TBS POWERCUBE Diagonal ESC Board
Team-blacksheep.com
$5.95

HD Camera

GoPro HERO6 Black (9 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO5 Session (197 builds)
Getfpv.com
$199.99

HD Camera

GoPro - HERO6 Black 4K Action Camera - black
See Site
Show stores (7)

Discussion

Sign in to comment

QuadX   27 days ago  

Hey mate, loving this frame! One question - would it be possible to fold the front and rear arms forward? Then bolt them back into place using a wing nut or similar?

lazd   27 days ago 

Yup, I can't see any reason why that wouldn't work. You'd just need to loosen the inner screw and remove the outer screw.

SFPV   Apr 20, 2018  
1

WIN A RAGGIO LUNGO FRAME WITH TBS GEAR!!!!
GO TO https://www.facebook.com/velocidroneracingleague/ TO SEE CONTEST RULES. ENDS APRIL 26TH

ypeeLs   Feb 24, 2018  

Do any of the 3D printed parts come with the frame?

Show 3 more comments
ypeeLs   Feb 27, 2018 

One last thing before i bite the bullet, will the Micro Eagle fit in the turret?

lazd   Feb 27, 2018 

It'll fit just fine, though with the bigger lens, the camera angle may be higher than you want. You can always shave the turret with an Xacto to get it lower though!

ypeeLs   Mar 02, 2018 

Alright I placed my order! I think I'm going to go with the Beitian BN-880 for GPS

RocketSquidFPV   Feb 28, 2018  

Holy flying fuck that looks awesome. Any words for how the powertrain feels?

recon   Feb 26, 2018  

Hell yeah LAZD! Clean build. Definitely grabbing this frame for my tax refund fleet. Any clearance issues with a Hobbywing F4 stack or should I go back to individual ESCs?

lazd   Feb 26, 2018 

Awesome! No issues with the Hobbywing stack, it'll fit perfectly with the included 20mm standoffs! That said, I bet your motor wires aren't long enough, heh.

recon   Feb 26, 2018 

You know it, lol. That's where the Racewire comes into the picture. Gotta love progression. Thanks for the quick reply!

Denis   Feb 25, 2018  

Looks absolutely phenomenal for cruising! Mind sharing recommended batteries & expected flight times?

lazd   Feb 25, 2018 

Not yet! I did about 5:30 on my 6" Raggio with an 1800mAh 6S on HQ 6x3x3 V1S at cruising speeds of around 70 knots, so I'm excited to see what I can on 7" with an even lower kV!

Whiffles   Feb 26, 2018 
1

Looking forward to hearing about the flight times. Also, any jello in the video?

Guides & Reviews

25 1,935  21
16 days ago

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more
58 8,067  91
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more