This lil sweetie is the replacement for this guy: https://rotorbuilds.com/build/8732.

Previous build had great power with Emax 1106's but was also a porky 100g which was obvious when flying. I liked the power but found it impossible to fly hard without getting terrible battery sag and always felt like the 2:30 fly time was just too short.

For this build my intention is to correct ills of previous build while retaining or gaining speed / thrust. To do this I wanted to keep weight as low as possible while finding a motor with a bit more efficiency & less weight. For this I chose the GEPRC Hummingbird frame and Airblade 1105 10000kv motors. I intend to run them on 3S and give them 50/50 on exploding but its a worthy experiment for such a powerful, light combo. Overall weight came in at 75g. If you're considering this frame I should probably mention that it is really tight!! Definitely do not recommend for your first build (or probably even your second)...

Maiden flight tomorrow - will report back...

Update -holy balls has this thing exceeded expectations. It honestly punches and accelerates every bit as hard as a 5". Unlike a 5", however, it has no inertia so it slows down really fast which takes some getting used to. Motors were a bit warm when I landed but nothing to be alarmed about. In summary, I would highly recommend this build for anyone who wants the balls-out fastest 2" that you can build or buy (and I would include the Emax Hawk R in this statement).