Räsvelg 5" QuadXL.com

By Quadxl on Mar 31, 2017

10  464  15

One of the challenging frames to build. First time for me building with 4in1 ESC, less cables and much clean. Also first time with a Revo FC the plan is to replace it to an Omnibus V2 Pro with built-in BF OSD. The BrotherHobby R4 motors feels like having so much power and their color is just appetizing... The canopy was ordered from https://www.phx-3d.com/ to match the motors color. Overall it was a fantastic build experience, another quad to my large collection.


Part List


Rasvelg (7 builds)

Flight Controller

Flip32 F4 (Revo Pin Header edition) V2 (21 builds)


30A Infantry _s "4IN1" ESC BLHELI_S-(MUILTSHOT)-(w/D-Shot Option) (8 builds)


4 x BrotherHobby Returner R4 Motor 2206 2300kv and 2600kv (3 builds)


Ideal Prop The Flying Fish 5041 Tri Blade Propeller (Red Clear) (3 builds)

FPV Camera

Foxeer HS1177 XAT600M DC5V-22V 600tvl Sony Super HAD CCD FPV Camera (71 builds)

FPV Transmitter

TBS UNIFY PRO 5G8 HV (RP-SMA) (82 builds)


TBS Triumph RP-SMA (RHCP 2pcs) (58 builds)


FrSky XSR ACCST 16CH Receiver

HD Camera

GoPro HERO5 Session (269 builds)
Show stores (6)


Sign in to comment

lazd   Apr 08, 2017  

You gotta try the 1.8mm lens, the Räsvelg canopy was designed for it and it's the ram jam!

Quadxl   Apr 10, 2017 

How is that related to this specific frame?

lazd   Apr 10, 2017 

When we designed the Rasvelg canopy, we added another camera mounting nub further up in the canopy specifically for the 1.8mm lens so people could have a nice wide angle lens. We decided not to design a version to fit larger lenses like the one you are using because it had caused issues with dealers having so many variations of the Garuda canopy.

Quadxl   Apr 10, 2017 

alright, thank mate!

HyphPV   Mar 31, 2017  

For the love of Betty Crocker's holy panty drawer, fix those Rx antennas! Just pull the exposed bits down inside the heat shrink around the zip tie so the wear and tear doesn't get to them, and they're kept straight. That portion of the antenna can be inside the heat shrink and along the plastic; those materials won't act as a shield and interfere with reception.

Show 4 more comments
lazd   Apr 08, 2017 

Take a look at Snowqueen, that's how I do my RX antennas: http://rotorbuilds.com/build/1672

Quadxl   Apr 08, 2017 

Thanks mate!

EreKeR101   Apr 08, 2017 

Mmmm...Betty Crocker...."jk"

QuadX   Apr 01, 2017  

Love the build!!! How do you like the props?

Quadxl   Apr 07, 2017 

They are ok, didn't use them too much yet.

EreKeR101   Apr 03, 2017  

Liking that build. .. where's the parts list for that C.A.T build flossing in background? ...."LoL".. little humor there😃

Guides & Reviews

52 3,886  44
25 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
35 2,600  18
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more